Tripods & Ball Heads

Home Bodies Lenses Filters Batteries, Etc.
Flash Memory, Etc. Bags, Etc. Misc. Items Books/DVD's

.

.

Tripods, Monopods, & Heads

  Legs Sec Max Load Max Height Low Height Closed Weight Price

X

Manfrotto 709B Digi-Table-Top Tripod w/Ball Head 1 4.5 lbs 3.54"   6.69" .2 lbs $        40.00

X

Flashpoint F-2560 Carbon Fiber Monopod w/Twist Lock Legs 4 11 lbs 55"   18.75" 10 oz $        84.95

X

Gitzo GT1541T Traveler Series 1 C.F. w/G-Lock              New    reg. $ 574.90 4 17.64 lbs 55.12" 6.89" 16.14" 2.14 lbs $      515.80
 

X

Markins Q-Ball Q3 Emille (Black) w/Quick Release                    2 @ $289.99   65 lbs 3.58”     .84 lbs $      579.98
X Markins Camera Plate PG-34N Black For D70s             $        49.95
X Markins Camera Plate P300U Black For D300             $        49.99

X

Markins Camera Plate PG-34N  For D300s

            $        54.95
X Markins Camera Plate PL-55 for Nikon 300mm f/4.5 IF AIS             $        49.99
Total

$    1425.61

.

Manfrotto 709B Digi-Table-Top Tripod w/Ball Head

    

     A compact, lightweight, table-top tripod perfect for a wide range of digital photographic applications. The Digi-Table-Top tripod was developed to maximize the superior imaging capabilities and versatility of generation, compact digital cameras.

     It sets up in seconds to form an exceptionally stable shooting platform that can be used virtually anywhere, indoors or their. It sports a handsome bright aluminum finish and comes complete with a silky-smooth Manfrotto Mini Ball Head providing 360° pan and ± 90° tilt.

Specifications

Head Type Manfrotto Mini Ball Head
360° pan and ± 90° tilt
Max Height w/closed column 3.54 inches
Closed Length 6.69 inches
Max Load Capacity 4.5 lbs
Weight .2 lbs

Adorama         Cost $40.00

.

.

Gitzo GT1541T, Series 1, 6X Carbon Fiber 4 Section Tripod Legs with G-Lock

Item Includes

Gitzo Tripod - Anti-dust Bag - Gitzo Warranty

Description

With such a good ratio of compact folded length to extended open height, the Traveler is the ideal tripod to carry with you around the world. Gitzo's unique patented 180º folding mechanism accommodates the head inside the folded tripod legs and makes this the smallest folded tripod for its open size and number of sections. Matching this compactness with the sturdiness of lightweight carbon fiber and good speed in setup makes the Travelers the ultimate tripods.

Features

Ground Level Set: This feature allows you to remove the center column to save weight and get the camera closer to the ground. Uses existing components: the upper disc with reversible 1/4 - 3/8 bolt and the column hook assembly.
ALR - A new Anti Leg Rotation system, which means the tripod can be opened in less than 15 seconds. Simply loosen all the twist locks on each leg at the same time, then pull the leg down and tighten the locks individually.
Hook: This built-in accessory allows you to hang a stabilizing weight (e.g. a full camera bag or a sand/water bag) from the bottom of the tripod center column. Useful with long heavy lenses, on uneven ground or in windy conditions.
Rapid Column: The center column locking collar above the tripod shoulder makes it easier to adjust the column quickly. Series 1 and above are built with an anti-rotation grooved center column for improved stability.
Reversible Column: The rapid column can easily be inverted for an alternative shooting angle or low level macro work.

Specifications

Maximum Height 52.76"
Leg Sections Four
Weight 2.14 lbs
Minimum Height 6.89"
Center Column Rapid
Closed Length 16.14"
Maximum Height (With Center Column Down) 44.49"
Load Capacity 17.64 lbs
Foot Type ALR - Anti-Rotation Leg System
Material 6X 1mm Carbon Fiber
Warranty Gitzo Warranty

 
TECHNICAL SPECIFICATIONS: (in - mm)
attaches by.: 1/4" and 3/8" screws attachment type
center column: rapid 
closed length: 16.14 in
leg angles: 24°. 65° 
leg sections: 4 number
level: compact 
load capacity: 17.64 lbs
material: carbon fiber 6X 
maximum height: 55.12 in
maximum height (with center column down): 44.49 in
minimum height: 6.89 in
series:
weight: 2.14 lbs

FEATURES:

GROUND LEVEL SET This new feature allows you to remove the center column to save weight and get the camera closer to the ground. Uses existing components: the upper disc with reversible 1/4 - 3/8 bolt and the column hook assembly: Remove column and fix the disk directly to the upper casting using the column hook. No tools needed.

RAPID COLUMN The center column locking collar above the tripod shoulder makes it easier to adjust the column quickly. Series 1 and above are built with an anti-rotation grooved center column for improved stability.

REVERSIBLE COLUMN The rapid column can easily be inverted for an alternative shooting angle or low level macro work.

.

Average price $667.00

Ebay store    lcd4video      New      Cost $ 515.80  shipping included

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

.

Flashpoint F-2560 Carbon Fiber Monopod w/Twist Lock Legs

     Adorama has studied for many years the needs and wants of the beginner, advanced and professional photographer. All the equipment that bears the Flashpoint name meets these essential qualifications, equipment that is dependable at a fair price. The Flashpoint Carbon Fiber Tripods are yet another fine example that follows in the Flashpoint tradition; high quality tripods that can go the distance. Made to Adorama's specifications, you'll feel the quality the first time you set it up. Leg locks that work! They open and close with ease. Pride of ownership is only a small reason to have one of these fine tripods in your equipment bag.
· Featuring classic European Styling, these Flashpoint tripods have all the features of other carbon fiber tripods, except the high price. Besides its legendary light weight, carbon fiber does not transfer heat like aluminum, but does absorb vibrations. This feature helps to insure sharper images.
     All Flashpoint tripod legs have rubber double-grip twist locks. The center column can be separated into a low column for ground le
vel use. The supplied wrench can adjust the leg friction to match the photographers needs. Leg tips can be set with either a rubber pad or ground spike for rugged terrain.

 Specifications

Tripod Head Mount 1/4-20 and 3/8"
Material Carbon Fiber
Maximum Monopod Height 55.11"
Closed Length 18.75"
Leg Sections 4
Leg Diameter 23mm
Leg Lock Type Twist Lock
Max Load Capacity 11 lbs
Weight 10 oz

Adorama         Cost  $84.95

.

Markins Q-Ball Q3 Emille with Knob Release (Black)

  • Unmatched High Performance: Super-strong and smooth bi-axial progressive locking mechanism is free of lock-up problem and easy to control. And, its superior mechanism provides even pressure in all directions.
  • Compact and Light: Amazing 65 lbs load capability while weighing only 0.83 lbs. This translates to an incredible 80 load/weight ratio, best in its class.
  • Fluid style main tension knob (patent pending) for smooth and easy operation
  • Engraved degree markings for panoramic photography
  • Beautiful and tough hard-anodized finish
  • Fits all standard monopods and tripods with a 3/8" bolt (monopods/tripods with a 1/4" bolt require an adapter bushing which is not provided)
  • Quickshoe is secured on the ball with "Loctite" for safety and performance.
  • Built-in spirit level for leveling.
  • Spring loaded detent pin to protect plates from accidental sliding.
  • Safety stop relief for plates with stopper screws.
  • Enclosed moving mechanism to keep the dust out.
  • Rounded corners and edges for safety and ergonomics.
Model   Markins Q-Ball Q3 Emille with Knob Release (Black)
  Camera Connection   Screw-Knob Style Quickshoe (QR-48)
  Maximum Load   65 lbs (30 kg)
  Maximum Torque   130 lbf·in (150 kgf·cm)
  Weight   0.83 lbs (375 g)
  Height   3.50 in (89 mm)
  Housing Diameter   1.89 in (48 mm)
  Panning Base Diameter   2.20 in(56 mm)
  Ball Diameter   1.50 in (38 mm)
  Friction Control   Bi-Axial Progressive
  Panning   Yes
  Panorama Index   Yes
  Tripod Mount Hole   3/8"–16 UNC
  Available Colors   Black, Blue, Red

.

Markins         Cost   2 @ $289.99  Total $579.98

.

Markins Camera Plate PG-34N  For D70s

  • Made of highest quality duralumin.
  • Patented hand strap hole.
  • Convenient bi-directional style dovetail design.
  • Scratch resistant hard-anodized surface.
  • ergonomically rounded corners and edges are safe and easy to handle.
  • Extra 1/4" hole for a monopod.
  • Compatible with other major manufacturers' Arca-Swiss style clamps.
  • Comes with a wide headed stainless steel screw HB1.
Model   Markins Camera Plate PG-34N
  Type   Anti-Twist Flange Style
  Weight   1.1 oz (30 g)
  Dimension   2.0 × 1.8 × 0.5 in (52 × 46 × 13 mm)
  Bidirectional   Yes
  Hand Strap Hole   Yes (Two)
  Mounting Bolt   1/4" UNC
  Monopod Hole   1/4" UNC
  Stopping Bolt   No
  Color   Black

 

Markins         Cost  $49.99

.

Markins Camera Plate PG-34N  For D300s

 
  • Custom fit with dedicated design for Nikon D300
  • Made of highest quality duralumin
  • Patented hand strap hole
  • Convenient bi-directional style dovetail design
  • Scratch resistant hard-anodized surface
  • Safe and ergonomically rounded corners and edges
  • Extra 1/4" hole for a monopod
  • Compatible with other major manufacturers' Arca-Swiss style clamps
  • Comes with a wide headed stainless steel screw HB1

 

Model   Markins Camera Plate P300U
  Type   Double Anti-Twist Flange
  Weight   1.4 oz (40 g)
  Dimension   1.75W X 2.44L X 0.4H in (44.5W X 62L X 10.7H mm)
  Bidirectional   Yes
  Hand Strap Hole   Yes
  Mounting Bolt   1/4" UNC
  Monopod Hole   1/4" UNC
  Stopping Bolt   No
  Color   Black
  Fit   Nikon D300

 

Markins         Cost  $49.99

.

Markins Camera Plate PL-70  For 70-200mm f/2.8G ED IF VR

 

HB1 with extra pitchScrew with Hex-Headed Hole
The plate comes with a new improved plate screw HB1. HB1 has a hex-headed hole that takes a 5/32" (4 mm) Allen wrench. Special hard alloy stainless-steel and a special die are used to manufacture these new screw.

The head is 22% bigger than competitors' screws, which provide extra force to resist separation (12mm vs 9.8mm diameter).

There is an extra pitch to provide stronger fastening strength (3.5 vs 2.5 pitch).

HB1 Head The deviation from perpendicularity is within only 0.03 mm compare to competitors' 0.1 mm.

All these extra features and precision provide high resistance to separation under stress.

Highest Quality Material
Made of the highest quality duralumin, it is light weight, low profile, and strong enough to support your equipments.

PG50 & D2H Hard-Anodized Surface
Hard-anodized surface is smooth and extremely resistant to scratches, chips or corrosion. It is 30% harder than stainless steel. Its surface is heat-resistant to the melting point of aluminum. This is the same process to be used to protect satellites from the harsh environment of space.

Compatibility
International standard dove-tail plate, compatible with Arca-Swiss type quick release clamps (Arca, Foba, Kirk, Wimberly, etc).

Anti-Twist Flange
Anti-twist flange effectively prevents the camera from twisting or moving.

Custom Fitting
Camera/lens specific design provides custom fit to your equipments, and allows access to all camera controls and functions without removing the plate.

Ergonomics & Safety
All the corners and edges are rounded by super-finishing barreling method for the safety to prevent from accidental injuries or damages to the other equipments.

Extra Monopod Hole
Available in some model, extra UNC 1/4 bolt-hole in the camera plate enables the attachment of a monopod.

Extra Long Plate for Long Lenses
The extra long Markins camera plate is useful for secondary holding of longer lenses, and can also be used for macro photography.

 
Model   Markins Camera Plate
  Type   Anti-Twist Flange
  Weight   1.76 oz (50 g)
  Dimension   1.4W X 2.9L X 0.3H in (37W X 75L X 8H mm)
  Bidirectional   No
  Hand Strap Hole   No
  Mounting Bolt   1/4" UNC
  Monopod Hole   1/4" UNC
  Stopping Bolt   No
  Color   Black

Markins         Cost  $54.95       $63.94   Shipping Included

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Markins Camera Plate PL-55 for Nikon 300mm f/4.5 IF AIS

\

HB1 with extra pitch Screw with Hex-Headed Hole
The plate comes with a new improved plate screw HB1. HB1 has a hex-headed hole that takes a 5/32" (4 mm) Allen wrench. Special hard alloy stainless-steel and a special die are used to manufacture these new screw.

The head is 22% bigger than competitors' screws, which provide extra force to resist separation (12mm vs 9.8mm diameter).

There is an extra pitch to provide stronger fastening strength (3.5 vs 2.5 pitch).

HB1 Head The deviation from perpendicularity is within only 0.03 mm compare to competitors' 0.1 mm.

All these extra features and precision provide high resistance to separation under stress.

Highest Quality Material
Made of the highest quality duralumin, it is light weight, low profile, and strong enough to support your equipments.

PG50 & D2H Hard-Anodized Surface
Hard-anodized surface is smooth and extremely resistant to scratches, chips or corrosion. It is 30% harder than stainless steel. Its surface is heat-resistant to the melting point of aluminum. This is the same process to be used to protect satellites from the harsh environment of space.

Compatibility
International standard dove-tail plate, compatible with Arca-Swiss type quick release clamps (Arca, Foba, Kirk, Wimberly, etc).

Anti-Twist Flange
Anti-twist flange effectively prevents the camera from twisting or moving.

Custom Fitting
Camera/lens specific design provides custom fit to your equipments, and allows access to all camera controls and functions without removing the plate.

Ergonomics & Safety
All the corners and edges are rounded by super-finishing barreling method for the safety to prevent from accidental injuries or damages to the other equipments.

Extra Monopod Hole
Available in some model, extra UNC 1/4 bolt-hole in the camera plate enables the attachment of a monopod.

Extra Long Plate for Long Lenses
The extra long Markins camera plate is useful for secondary holding of longer lenses, and can also be used for macro photography.

  Model   Markins Camera Plate
  Type   Anti-Twist Flange
  Weight   1.3 oz (36 g)
  Dimension   1.4W X 2.4L X 0.3H in (37W X 60L X 8H mm)
  Bidirectional   No
  Hand Strap Hole   No
  Mounting Bolt   1/4" UNC
  Monopod Hole   1/4" UNC
  Stopping Bolt   No
  Color   Black

Markins         Cost  $49.99       $63.94   Shipping Included

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Home

.